Menu
Your Cart
Bathroom window film

Bathroom Window Film

Bathroom window film turns clear glass into a surface nobody can see through, and leaves the daylight where it is. That is the whole job: the room stays bright, the window stays a window, and the view from the street or from the neighbour's yard is gone - at noon and at nine in the evening with the light on.

Window Film Shop #1 cuts every sheet to your dimensions in inches, to 1/32", and the cutting costs nothing on top of the material. The largest single piece is 110 inches.

Bathroom window film on a frosted glass pane

What comes in the box

  • The piece cut to your size, corners finished, labelled with its dimensions.
  • An application tool for smoothing the sheet down without scratching it.
  • A bottle of installation concentrate - the solution the wet method needs.
  • A free test piece of the same material, so the first attempt is on a scrap.

Privacy or frosting - two ways to do the same window

Both block the view. The difference is what the glass looks like afterwards, and that is worth two minutes of thought before ordering.

  • Bathroom window privacy film - the dense end: milk white, matte bronze, opaque shades. Nothing shows through, and the pane reads as a solid design element rather than a covered window.
  • Bathroom window frosting - the etched-glass look: light passes, silhouettes blur, the surface keeps a faint texture. This is what most people picture when they say "frosted bathroom window".

For a shower enclosure the frosting versions are the usual pick - the glass is close to you, and full opacity in a small cubicle makes it feel like a closet.

Waterproof bathroom window film: steam is not a problem

A bathroom is the hardest room in the house for anything glued to glass: hot water, steam twice a day, cleaning chemicals. These films are built for it. The adhesive is designed for wet application and cures under water, so a waterproof window film for bathroom glass is not a special product - it is the normal one, working where it was meant to.

Fitted on the inside of the pane, the film lasts nine years and more. Steam does not lift the edges, and condensation running down the glass does nothing to it. What does shorten its life is abrasive cleaning: powders and scrapers, not humidity.

Films in this section

Four materials cover almost every bathroom, plus two striped patterns for people who want the window to look designed rather than covered.

Films used on bathroom windows: look, light transmission and total solar energy rejection.
FilmLookVLTTSER
Solo 002Frosted, light grey75%18%
Stella White MattWhite, matte71%35%
Stella Milk-matteMilk white, matte67%35%
Matte BronzeWarm bronze, matte——

Two striped options sit alongside them: narrow stripes 3/8 inch wide and wide stripes 1 3/4 inches wide. Stripes screen the lower half of a window and leave the top clear, which suits a bathroom where the glass looks onto a yard rather than a street.

Bathroom glass window film with a frosted etched look

Ordering window film for bathroom windows

  1. Measure the glass, not the frame - the pane you actually see.
  2. Enter height and width in inches on the product page, fractions included: 20 20/32" x 45 15/32" goes in exactly as written, no need to reduce anything.
  3. Add to cart. The price appears at once, the sheet is cut to 1/32" and arrives labelled with its size.

Bathroom windows are often small and odd-shaped, which is exactly where cutting to size pays off: a 24 x 16 inch pane costs what that pane costs, instead of a roll with most of it going in the trash.

Fitting it: wet method, twenty minutes

Every film here is a bathroom window adhesive film - the glue is already on it, protected by a liner you peel off at the last moment.

Clean the glass first, and clean it better than you think you need to: bathroom panes carry hard-water spots and dust from the tile, and anything left behind shows through the film as a bump. Then spray the pane and the exposed adhesive with the solution, lay the sheet on, position it against the frame, and squeeze the water out from the centre with the tool. Give it a day or two before the first hot shower so the adhesive can cure with the water out.

Inside the pane, not outside

These films go on the room side of the glass. That is the standard everywhere, and in a bathroom there is no argument for anything else: the inner face is dry between showers, easy to reach, and protected from rain, frost and direct sun, which is what gives the material its nine-plus years. Exterior mounting exists for cases where there is no access from inside - a fixed pane above a stairwell, a window that opens onto a light well - and it costs roughly half the service life.

One practical note for older houses: patterned or textured glass will not take film. The adhesive needs a smooth surface to bond to, and on ribbed or hammered glass it grips only the high points and lets go within weeks. If the existing pane is already textured, it is usually doing the privacy job anyway.

Questions people ask before ordering

Will the bathroom get dark?

No. The films here pass 67% to 75% of the daylight, so a small bathroom window keeps working as a window. What disappears is the view, not the light - that is the difference between film and a blind.

Will steam make it peel off?

No. The adhesive is designed to be applied wet and to cure with water under it, so humidity is its normal working environment. Give a freshly fitted sheet a day or two before the first hot shower and it will not lift at the edges afterwards.

Can I put it on the shower screen itself?

Yes - the screen is flat tempered glass and takes film the same way a window does. Frosting versions are the usual choice there; a fully opaque sheet in a small cubicle makes it feel closed in.

Can it be removed later?

Yes, without damaging the glass. A sheet that has been up a couple of years peels in one piece; after ten years or more it may come away in strips and need a scraper and some heat. Adhesive residue washes off with ordinary glass cleaner.

Using the window as part of the room

A bathroom glass window film is the cheapest change you can make to that room. Milk white next to white tile reads as frosted glass rather than a covering. Matte bronze warms up a room with wood or brass fittings, where a cold white film looks like a repair. Stripes turn a plain pane into a deliberate detail, and they are the option people pick when the window is visible from the living area.

And nothing here is permanent: a bathroom window privacy film peels off without damaging the glass, so a rented apartment or a house you plan to sell is not a problem.

Window Film Shop #1 ships across the USA by FedEx, with the tool, the concentrate and the test piece in every box.

Model: Frosted film Solo 002
Solo 002 – Frosted Privacy Film Cut to Size Solo 002 – Frosted Privacy Window Film with precision cutting to the customer’s exact custom sizes. The film gives the same effect both day and night: it lets light through but removes the ability to see through. We perform accurate cutting of privacy wi..
$5.38
Ex Tax:$5.38
Model: Free window tint tool kit
Large Tool Kit for Bigger Window Film Orders With every order we include glass tinting tools. For larger orders we add the full tool kit and mounting concentrate. Specialized tools are needed for tinting work, so they come together with the film.Custom Cutting to Your Sizes At our online shop ..
$0.00
Ex Tax:$0.00
Model: Small window tint tool kit - Get for Free
Small Tool Kit - 3M Squeegee PA-1 + Mounting Concentrate With every order, we include the necessary tools and a mounting concentrate, tailored to the size of your purchase. For smaller orders, we add a compact tool set.Free and Precise Custom Cutting Service We offer complimentary custom cutti..
$0.00
Ex Tax:$0.00
Model: Stella
Buy Stella-White Matte Privacy Film Cut to Size Stella-White Matt Film is a privacy film for day and night use. It is the film to take when the glass has to stop being transparent but the room still has to keep its light.Privacy That Does Not Depend on the Light Stella-White gives the same eff..
$4.68
Ex Tax:$4.68
Model: Deco Stripes 00/10
Buy Striped Frosted Window Film — Deco Stripes 00/10 Deco Stripes 00/10 is a clear film with frosted stripes 3/8 inch wide. The model number is 00/10; you may also see it in the catalogue by what it actually is — window film with narrow stripes 3/8 inch wide. The fine stripes break up the view thro..
$4.96
Ex Tax:$4.96
Model: Stella -Milk
Stella -Milk-matte Window Tint Film Purchase Stella - Milk-matte Film for privacy. The film has a milky white color and sits well in light interiors; its surface is smooth, so on the glass it reads as frosted glass rather than as a film.Lets light through but provides privacy both day and night..
$5.12
Ex Tax:$5.12
Model: Free additional piece
Get a Window Film Fragment with Each Order With every order from our online store you also receive a free fragment of window film close to the one you bought. You can handle the film and see how it behaves before you put the main pieces on the glass. The additional fragment allows you to:Condu..
$0.00
Ex Tax:$0.00
Matte bronze window film Matte bronze window film
Out Of Stock
Model: Matte bronze window film
Bronze Matte Film for Glass Bronze matte film puts a light bronze frost on the glass. The glass stops being see-through from both sides and keeps letting the daylight in — the same effect as a white frosted film, only in bronze.Where Bronze Matte Film Is Used This is the film people take w..
$5.12
Ex Tax:$5.12
Privacy film with wide stripes 1 and 3/4 inches wide Privacy film with wide stripes 1 and 3/4 inches wide
2-3 Days
Model: Deco Stripes 00/45
Decorative Film with Wide Stripes 1 and 3/4 Inches Deco Stripes 00/45 is a decorative window film with wide stripes. The stripes are 1 and 3/4 inches wide and white, and they let the daylight through. Buy Striped Window Film - Custom Sizes in Inches We provide custom cutting of window film to mee..
$4.98
Ex Tax:$4.98
Showing 1 to 9 of 9 (1 Pages)